Pre- and Post- Scanning of Collision Vehicles Subaru of America, Inc.
With each new model, Subaru makes advancements in technology that assist in the operation and safety of our vehicles. These advancements incorporate different sensor, cameras, control units, as well as other components, to assist with the functionality of the vehicle. They are a critical part of vehicle operation and the safety features in each Subaru vehicle.
Proper diagnostic scans give you peace-of-mind
In the event of a collision, these components could incur damage, which may trigger diagnostic trouble codes (DTC), but may not be evident via a warning light on the instrument cluster. It is imperative that these components be evaluated after a collision to ensure the vehicle is completely repaired. If these components are not evaluated, it could have a direct effect on vehicle operation and safety. For Subaru vehicles from model year 2004 and forward involved in a collision, Subaru collision repair procedure recommends that prerepair scanning be performed. Pre-scanning will reveal DTCs for items that are not functioning properly in the vehicle. It allows a shop to identify any issues early in the estimate process, allowing a more complete estimate and encompassing repair process. Additionally, Subaru collision repair procedure also recommends that postrepair scanning be performed on these vehicles.
Subaru recommends the use of the Subaru SSM4 diagnostic tool
Post scanning is critical in ensuring the malfunctioning items have been repaired and there are no remaining DTCs. It may also assist in assuring the appropriate calibrations and reinitializations have been performed. To accurately determine whether DTCs are present in a vehicle, Subaru recommends the use of the Subaru SSM4 diagnostic tool. Information regarding the purchase of the Subaru SSM4 diagnostic software application and Denso DST-i interface device can be found in the Subaru Technical Information System (STIS) at https://techinfo.subaru.com > Information > Special Tool Information.
Always use Genuine Subaru original parts
If a collision repair is necessary, Subaru of America, Inc. strongly recommends using Genuine Subaru replacement body parts, mechanical components, and electrical parts including all safety devices such as airbags and seatbelts. The use of Genuine Subaru original parts will help ensure the vehicle is restored back to its original pre-collision condition and the structural integrity of the vehicle will perform as it was designed and tested in the event of another collision. The safety of our customers is our number one priority. The use of any aftermarket or substitute structural, body, mechanical or electrical repair parts are not covered under the Subaru of America, Inc. limited warranty, replacement parts limited warranty or Subaru Added Security (SAS) agreements or contracts. Subaru of America, Inc. is not responsible for any resultant damage caused by the use and/or installation of any aftermarket substitute part(s).
What this means to you
Pre- and post-scanning is necessary on any car 2004 and newer to ascertain that the car is safe and sound. Make certain that any collision repair company performs all proper scanning before they give the vehicle back to you. Otherwise, it might not be under warranty that can open the owner to additional issues and problems down the road.
Syndicated content from https://capturethekeys.com.